Single Cartridge Seals
314.HQCS-16(C170/C170L)
Type： Slurry Pump Seal
Replacement： Chesterton 170,170L
Temperature： ≤180℃
Pressure： ≤0.8Mpa
Speed： ≤10m/s
Material： A,B,Q2,U2,P,K,E,G,M5
HQS-C170
d | D1 | D2 | D3 | D4 | D4(min) | D4 | |||
(mm) | max | min | max | 10(spqare) | 10(round) | 12(square) | 12(round) | 16(square) | 16(round) |
38 | 60.1 | 62.8 | 139.2 | 99.4 | 118.5 | 102.8 | 122 | – | – |
40 | 62 | 64.7 | 151.9 | 101.3 | 120.4 | 104.7 | 123.9 | – | – |
43 | 65 | 67.7 | 151.9 | 104.3 | 123.4 | 107.7 | 126.9 | – | – |
45 | 67 | 69.7 | 164.6 | 106.3 | 125.4 | 109.7 | 128.9 | – | – |
48 | 70 | 72.7 | 164.6 | 109.3 | 128.4 | 112.7 | 131.9 | – | – |
50 | 72 | 74.8 | 164.6 | 111.3 | 130.5 | 114.7 | 133.9 | – | – |
55 | 77 | 79.7 | 177.3 | 116.3 | 135.4 | 119.7 | 138.9 | 126.6 | 145.8 |
60 | 82.3 | 85.1 | 177.3 | 121.6 | 140.8 | 125 | 144.2 | 132 | 151.2 |
12mm | 12mm | 16mm | 16mm | 20mm | 20mm | ||||
65 | 93.8 | 97.8 | 206 | 141 | 170.3 | 148 | 177.2 | – | – |
70 | 97.1 | 101.2 | 209.3 | 144.4 | 173.6 | 151.3 | 180.5 | – | – |
75 | 103.3 | 107.4 | 215.5 | 150.6 | 179.8 | 157.5 | 186.7 | – | – |
80 | 107.1 | 111.2 | 219.3 | 154.4 | 183.6 | 161.3 | 190.5 | – | – |
85 | 112.8 | 116.9 | 225 | 160.1 | 189.3 | 167 | 196.2 | 174 | 203.2 |
90 | 117.1 | 121.2 | 229.3 | 164.4 | 193.6 | 171.3 | 200.5 | 178.3 | 207.5 |
95 | 122.4 | 126.4 | 234.6 | 169.6 | 198.8 | 176.6 | 205.8 | 183.5 | 212.7 |
100 | 141.8 | 147.3 | 234.3 | 176 | 212.3 | 182.9 | 219.2 | 189.9 | 226.2 |
110 | 151.3 | 156.8 | 243.8 | 185.5 | 221.8 | 192.4 | 228.8 | 199.4 | 235.7 |
120 | 160.8 | 166.3 | 253.4 | 195 | 231.3 | 202 | 238.3 | 208.9 | 245.2 |
130 | 173.5 | 179 | 266.1 | – | – | 214.7 | 251 | 221.6 | 257.9 |
140 | 180.2 | 185.7 | 272.7 | – | – | 221.3 | 257.6 | 228.3 | 264.6 |
145 | 186.2 | 191.7 | 278.8 | – | – | 227.4 | 263.7 | 234.3 | 270.6 |
150 | 192.6 | 198.1 | 285.1 | – | – | 233.7 | 270 | 240.7 | 277 |
160 | 200.2 | 205.7 | 292.7 | – | – | 241.3 | 277.6 | 248.3 | 284.6 |
170 | 211.6 | 217.1 | 304.2 | – | – | 252.8 | 289.1 | 259.7 | 296 |
180 | 220.2 | 225.7 | 312.7 | – | – | 261.3 | 297.6 | 268.3 | 304.6 |
d | D4(min) | D5 | D6 | D7 | L1 | L2 | L3 | |||
(mm) | square | round | square | round | ||||||
38 | – | – | – | – | 128 | 137 | 227 | 49.5 | 34.1 | 22.4 |
40 | – | – | – | – | 129 | 138 | 228 | 49.5 | 34.1 | 22.4 |
43 | – | – | – | – | 131 | 140 | 229 | 49.5 | 34.1 | 22.4 |
45 | – | – | – | – | 133 | 141 | 229 | 49.5 | 34.1 | 22.4 |
48 | – | – | – | – | 134 | 143 | 230 | 49.5 | 34.1 | 22.4 |
50 | – | – | – | – | 136 | 144 | 231 | 49.5 | 34.1 | 22.4 |
55 | – | – | – | – | 139 | 147 | 232 | 49.5 | 34.1 | 22.4 |
60 | – | – | – | – | 142 | 150 | 234 | 49.5 | 34.1 | 22.4 |
24mm | 24mm | 30mm | 30mm | |||||||
65 | – | – | – | – | 231 | 236 | 237 | 64 | 43.7 | 29.7 |
70 | – | – | – | – | 232 | 237 | 238 | 64 | 43.7 | 29.7 |
75 | – | – | – | – | 234 | 239 | 240 | 64 | 43.7 | 29.7 |
80 | – | – | – | – | 236 | 240 | 241 | 64 | 43.7 | 29.7 |
85 | – | – | – | – | 237 | 242 | 243 | 64 | 43.7 | 29.7 |
90 | – | – | – | – | 239 | 243 | 245 | 64 | 43.7 | 29.7 |
95 | – | – | – | – | 240 | 245 | 246 | 64 | 43.7 | 29.7 |
100 | – | – | – | – | 345 | 351 | 363 | 76.8 | 43.7 | 36.6 |
110 | – | – | – | – | 348 | 354 | 356 | 76.8 | 43.7 | 36.6 |
120 | 215.8 | 252.1 | 227.4 | 263.7 | 351 | 357 | 359 | 76.8 | 61.7 | 36.6 |
130 | 228.5 | 264.8 | 240.1 | 276.4 | 354 | 361 | 362 | 76.8 | 61.7 | 36.6 |
140 | 235.2 | 271.5 | 246.7 | 283 | 357 | 362 | 363 | 76.8 | 61.7 | 36.6 |
145 | 241.2 | 277.5 | 252.8 | 289.1 | 359 | 363 | 364 | 76.8 | 61.7 | 36.6 |
150 | 247.6 | 283.9 | 259.1 | 295.4 | 361 | 364 | 365 | 76.8 | 61.7 | 36.6 |
160 | 237.6 | 255.2 | 303 | 266.7 | 363 | 365 | 367 | 76.8 | 61.7 | 36.6 |
170 | 249 | 266.6 | 314.5 | 278.2 | 364 | 367 | 368 | 76.8 | 61.7 | 36.6 |
180 | 257.6 | 275.2 | 323 | 286.7 | 366 | 368 | 370 | 76.8 | 61.7 | 36.6 |
d | D1 | D2 | D3 | D4 | D4(min) | D4 | ||
(inch) | max | min | max | 3/8(spqare) | 3/8(round) | 1/2(square) | 1/2(round) | 5/8(square) |
1.500 | 2.37 | 2.47 | 5.48 | 3.88 | 4.46 | 4.10 | 4.85 | – |
1.625 | 2.49 | 2.6 | 5.98 | 3.96 | 4.71 | 4.17 | 4.93 | – |
1.750 | 2.62 | 2.72 | 6.48 | 4.01 | 4.76 | 4.22 | 4.98 | – |
1.875 | 2.74 | 2.86 | 6.48 | 4.07 | 7.83 | 4.29 | 5.04 | – |
2.000 | 2.87 | 2.97 | 6.48 | 4.13 | 4.89 | 4.35 | 5.10 | – |
2.125 | 2.99 | 3.10 | 6.98 | 4.15 | 4.91 | 4.37 | 5.12 | 4.94 |
2.250 | 3.12 | 3.22 | 6.98 | 4.26 | 5.01 | 4.47 | 5.23 | 4.98 |
2.375 | 3.24 | 3.35 | 6.98 | 4.27 | 5.03 | 4.49 | 5.24 | 5.06 |
2.500 | 3.37 | 3.47 | 7.48 | 4.36 | 5.10 | 4.57 | 5.32 | 5.19 |
1/2” | 1/2” | 5/8” | 5/8” | 3/4” | ||||
2.625 | 3.69 | 3.85 | 8.11 | 5.60 | 6.75 | 5.82 | 6.97 | – |
2.750 | 3.82 | 3.98 | 8.24 | 5.73 | 6.88 | 5.95 | 7.10 | – |
2.875 | 3.94 | 4.10 | 8.36 | 5.85 | 7.00 | 6.07 | 7.22 | – |
3.000 | 4.07 | 4.23 | 8.49 | 5.98 | 7.13 | 6.19 | 7.34 | – |
3.125 | 4.19 | 4.35 | 8.61 | 6.10 | 7.25 | 6.32 | 7.47 | 5.99 |
3.250 | 4.32 | 4.48 | 8.74 | 6.23 | 7.38 | 6.44 | 7.59 | 6.11 |
3.375 | 4.44 | 4.60 | 8.86 | 6.35 | 7.5 | 6.57 | 7.72 | 6.24 |
3.500 | 4.57 | 4.73 | 8.99 | 6.48 | 7.63 | 6.69 | 7.84 | 6.36 |
3.625 | 4.69 | 4.85 | 9.11 | 6.60 | 7.75 | 6.82 | 7.97 | 6.49 |
3.750 | 4.82 | 4.98 | 9.24 | 6.73 | 7.88 | 6.94 | 8.09 | 6.61 |
3.875 | 4.94 | 5.10 | 9.36 | 6.85 | 8.00 | 7.07 | 8.22 | 6.74 |
4.0000 | 5.58 | 5.80 | 9.23 | 6.98 | 8.41 | 7.19 | 8.62 | 7.41 |
4.125 | 5.71 | 5.92 | 9.35 | 7.1 | 8.53 | 7.32 | 8.75 | 7.53 |
4.250 | 5.83 | 6.05 | 9.48 | 7.23 | 8.66 | 7.44 | 8.87 | 7.66 |
4.375 | 5.96 | 6.17 | 9.60 | 7.35 | 8.76 | 7.57 | 9.00 | 7.78 |
4.500 | 6.08 | 6.30 | 9.73 | 7.48 | 8.91 | 7.69 | 9.12 | 7.91 |
3/4” | 3/4” | 7/8” | 7/8” | 1” | ||||
4.625 | 6.21 | 6.42 | 9.85 | 8.03 | 9.46 | 8.25 | 9.68 | |
Single Cartridge Seals
CONTACT US
Ningbo Yinzhou Huaqiu Industry And Trade Co., Ltd.
Phone: 0086-13616570630
Email: hq@hqseal.com
Add: No.45 Lane 578 TianTong Southern Road NingBo City China